(DIN 24 041)

Edge:

Standard edge e1 and e2 = 20 to 40 + u resp. g and f1 and f2 = 20 to 40 + t resp. v or g (average value of different production processes) is determined by the size of plates, width of hole and pitch. Smaller or larger edges e1, e2, f1 and f2 are dependent on the pitch and width of hole.

Please enclose a drawing or sketch with your enquiry or order for special plates or plates with unnormal edges.

Examples:

Description of a hexagonal hole in staggered rows (Hv) with key width w = 6 mm, pitch t = 6,7 mm

Hexagonal hole Hv 6-6,7 DIN 24 041

Description of a perforated plate, 1,5 mm thick, a1 = 1000 mm, b1 = 2000 mm, hole Hv 6-6.7, with normal edge, made of steel sheet.

Perforated plate 1,5 x 1000 x 2000 Hv 6-6,7 DIN 24 041 steel sheet

Description of a perforated plate, 1.5 mm thick, a1 = 1100 mm, b1 = 1600 mm with fixed sizes, hole Hv 6-6.7, with edge (Ra) e1 = 10mm, e2 = 18 mm und f1 resp. f2 = 25 mm , made of steel sheet.

Perforated sheet 1.5 x 1100 x 1600 fix Hv 6-6.7, edge (Ra) 10/18 x 25/25 DIN 24 041, steel sheet.